manualshive.com logo in svg

SENSTAR Symphony 7.2 Series, User Manual

Share
Download
SENSTAR Symphony 7.2 Series User Manual Download Page 120

Symphony Client

12. In the 

Graph

 section, perform the following tasks to determine the appearance of the graph in

the report:
a) In the 

Default Graph

 list, select the alarm type to display.

b) In the 

Graph Type

 list, select whether the graph is a line or bar graph.

c) In the 

Graph Size

 list, select the size of the graph.

13. In the 

Table Layout

 section, perform the following tasks to determine the appearance of the

table in the report:
a) In the 

Columns

 list, select the information that will appear in the columns of the report.

b) In the 

Grouping

 section, select how the information is grouped in the report.

c) In the 

Sorting

 section, select how the information is sorted in the report.

14. Click 

Save

.

Edit a report

You can make changes to an existing report in the Report Designer.
1.

In the client interface, click 

Reports

.

The Report Designer opens in a browser.

2.

Log in to the Report Designer.

3.

Perform one of the following tasks:
• Select a report and click 

Edit

.

• Double-click a report.

4.

Make changes to the report.

5.

Click 

Save

.

Run a report

You can manually generate a report at any time.
1.

In the client interface, click 

Reports

.

The Report Designer opens in a browser.

2.

Log in to the Report Designer.

3.

Select a report.

4.

Click 

Run

.

Alarms

Alarms occur when a video analytic running on a device detects the conditions of a rule.
In the client interface, alarms appear in the camera timeline.

Disable alarms for a camera

You can disable the alarms for a camera in the Symphony Client.
1.

In the client interface, right-click a camera in the device tree.

2.

Click 

Disable Alarms for Camera

.

3.

Specify the time (minutes) for which the alarms are disabled.

4.

Click 

OK

.

To enable the alarm again, right-click the camera and click 

Enable Alarms for Camera

.

Senstar Symphony User Guide

120

Summary of Contents for Symphony 7.2 Series

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands