SENSTAR Symphony 7.2 Series, User Manual

Page: 114 / 128

Symphony Client
7. Click OK .
8. In the Entrance Cameras section, perform the following tasks to add the cameras that provide
information for the report:
a) Click
Add Cameras .
b) Select one or more cameras.
You can search for cameras by camera name.
c) Click OK .
9. In the Exit Cameras section, perform the following tasks to add the cameras that provide
information for the report:
a) Click
Add Cameras .
b) Select one or more cameras.
You can search for cameras by camera name.
c) Click OK .
10. In the Face Recognition section, perform the following tasks to
a) To exclude faces that are observed by an exit camera first and then by an entrance camera,
select Remove exit-to-entrance matches .
b) In the Minimum confidence for report field, select how confident that the Face
Recognition video analytic must be for it to report on the face.
c) In the Reporting block size field, select the time (in seconds) from which the Face
Recognition video analytic chooses the best face match.
d) In the Number of blocks to check after current field, set how many blocks of time that
the Face Recognition video analyticsearches for a face match.
e) In the Timeout for first match in block field, set the time before which the Face
Recognition video analytic must detect a face entering the scene for the face to be eligible
for a match.
f) In the Hours to run report list, select the times at which the Face Recognition video
analytic generates data for the report.
11. In the Date Range section, perform the following tasks to determine the data that the report
includes:
a) In the
Start including data from section, define the start of the data.
b) In the Stop including data after section, define the end of the data.
c) To use data from a specific time range from each day, select Use custom time range for
data collection and specify the time range.
12. In the Schedule section, perform the following tasks to run the report automatically:
a) Select Schedule Enabled .
b) In the Recurrence section, set when the report runs.
c) In the Schedule start section, set when the report starts running automatically.
d) In the Schedule finish section, set when the report stops running automatically.
13. In the Distribution section, perform the following tasks to determine how Symphony
distributes reports:
a) To send the report attached to an email, select
Send report in email , specify the email
addresses of the recipients, and select the file formats for the reports.
b) To save the report as a file, select Save report to file , specify the path, define the file
name, and select the file formats.
14. In the Table Layout section, perform the following tasks to determine the appearance of the
table in the report:
a) In the
Columns list, select the information that will appear in the columns of the report.
b) In the Grouping section, select how the information is grouped in the report.
c) In the Sorting section, select how the information is sorted in the report.
15. Click Save .
Senstar Symphony User Guide 114