SENSTAR Symphony 7.2 Series, User Manual

Page: 112 / 128

Symphony Client
2. Log in to the Report Designer.
3. Click New Report .
4. Type a name for the report.
5. In the Report Type list, select Alarm Report .
6. To allow other users to run the report, select Allow other users to run this report .
7. Click OK .
8. In the Cameras section, perform the following tasks to add the cameras that provide
information for the report:
a) Click
Add Cameras .
b) Select one or more cameras.
You can search for cameras by camera name.
c) Click OK .
9. In the Date Range section, perform the following tasks to determine the data that the report
includes:
a) In the
Start including data from section, define the start of the data.
b) In the Stop including data after section, define the end of the data.
c) To use data from a specific time range from each day, select Use custom time range for
data collection and specify the time range.
10. In the Schedule section, perform the following tasks to run the report automatically:
a) Select Schedule Enabled .
b) In the Recurrence section, set when the report runs.
c) In the Schedule start section, set when the report starts running automatically.
d) In the Schedule finish section, set when the report stops running automatically.
11. In the Distribution section, perform the following tasks to determine how Symphony
distributes reports:
a) To send the report attached to an email, select
Send report in email , specify the email
addresses of the recipients, and select the file formats for the reports.
b) To save the report as a file, select Save report to file , specify the path, define the file
name, and select the file formats.
12. In the Table Layout section, perform the following tasks to determine the appearance of the
table in the report:
a) In the
Columns list, select the information that will appear in the columns of the report.
b) In the Grouping section, select how the information is grouped in the report.
c) In the Sorting section, select how the information is sorted in the report.
13. Click Save .
Create an alarm statistics report
The alarm statistics report summarizes alarms for a specific time.
1.
In the client interface, click Reports .
The Report Designer opens in a browser.
2. Log in to the Report Designer.
3. Click New Report .
4. Type a name for the report.
5. In the Report Type list, select Alarm Statistics .
6. To allow other users to run the report, select Allow other users to run this report .
7. Click OK .
Senstar Symphony User Guide 112