manualshive.com logo in svg

SENSTAR Symphony 7.2 Series, User Manual

Share
Download
SENSTAR Symphony 7.2 Series User Manual Download Page 63

Symphony Server

This is an example of a poor plate detection frame:

Setting

Description

Reporting Confidence

Use the slider bar to define how sensitive the video analytic

is. The reporting confidence is 50% by default. A lower

reporting confidence results in more detection and might affect

performance.

Minimum height

This field displays the height of the inner rectangle.

Maximum height

This field displays the height of the outer rectangle.

Minimum width

This field displays the width of the inner rectangle.
This setting is only available for Automatic License Plate

Recognition Core.

Maximum width

This field displays the width of the outer rectangle.
This setting is only available for Automatic License Plate

Recognition Core.

Minimum slant

This field displays the minimum slant of the vertical lines.
This setting is only available for Automatic License Plate

Recognition Peripheral.

Maximum slant

This field displays the maximum slant of the vertical lines.
This setting is only available for Automatic License Plate

Recognition Peripheral.

Minimum slope

This field displays the minimum slope of the horizontal lines.
This setting is only available for Automatic License Plate

Recognition Peripheral.

Senstar Symphony User Guide

63

Summary of Contents for Symphony 7.2 Series

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands