SENSTAR Symphony 7.2 Series User Manual Download Page 61

Page: 61 / 128

Symphony Server

With Automatic License Plate Recognition, a 720p network camera can analyze up to two lanes of

traffic if the license plate images are at least 32 pixels in height for Latin characters or 40 pixels in

height for non-Latin characters.
Typical uses for Automatic License Plate Recognition include:
• Toll collection in parking garages

• Traffic control

• Border crossings

• Pattern of use analysis

Configure Automatic License Plate Recognition

Configure the Automatic License Plate Recognition video analytic for each camera that runs the

video analytic.
1.

In the Symphony server configuration interface, click

Devices

Cameras

Select the camera on which you want to run Automatic License Plate Recognition and click

Edit

In the

Add-Ons

section, click the button beside Automatic License Plate Recognition to turn it

on.

Click the

Configure

button beside Automatic License Plate Recognition.

In the

Overview

section, configure analysis options and select whether the advanced options

are hidden (simple mode on) or visible (simple mode off).

If the image in the

Processing Mask

and

Plate Detection

sections do not include an image that

is suitable for license plate detection, update the image.
a) Click

Change Image

b) In the Web Access interface, use the timeline and video controls to navigate to an image

that is suitable for license plate detection.

c) Click

Select

In the

Processing Mask

image, define the areas that the video analytic analyzes and ignores.

a) In the

Drawing Mode

list, select whether to draw an area to analyze or ignore.

b) Using the

Size

slider, select the size of drawing circle.

c) On the image, click and drag the drawing circle to define the areas to analyze or ignore.

In the

Plate Detection

image, draw a frame around the license plate so that the edges of the

text on the license plate fall within the green frame.
a) Click and drag the frame on the image.

b) To move the frame, click in the middle of the green frame and drag the frame.

c) To change the size of the frame, click an edge of the frame and drag the line to change the

size.

d) To adjust the slant and slope of the frame, click a corner of the frame and drag the corner

to change the slant or slope.

Using the

Reporting Confidence

slider, select how sensitive the video analytic is to potential

license plates.

10. Click

Senstar Symphony User Guide

Summary of Contents for Symphony 7.2 Series

































































































































Search results

Summary of Contents for Symphony 7.2 Series

Reviews:

Brands by name

Popular brands

SENSTAR Symphony 7.2 Series, User Manual

Search results

Summary of Contents for Symphony 7.2 Series

Reviews:

Brands by name

Popular brands