SENSTAR Symphony 7.2 Series User Manual Download Page 58

Page: 58 / 128

Symphony Server

Configure automatic server updates

The Symphony Server can perform automatic updates.
1.

In the server configuration interface, click

Settings

Maintenance

In the

Server Updates

section, select

Enable automatic updates

Specify when to download and install the update.

Perform one of the following actions:
• To update from a specific location, select

Update from the following location

and type the

file path.

• To update from the Internet, select

Update from product web site

Click

Save

Check for server updates

In you have a standalone Symphony Server (single-server farm), you can manually check for

software updates.
This feature is not available in multi-server farms.
1.

In the server configuration interface, click

Settings

Maintenance

In the

Server Updates

section, click

Check for Updates

If there are updates and you want to apply the updates, click

Yes

The Symphony Server starts downloading and installing updates.

Click

Close

Click

Close

again.

Wait 20 minutes and then log in to the server configuration interface.

Configure client updates

You can configure when the Symphony Client applies updates.
1.

In the server configuration interface, click

Settings

Maintenance

In the

Client Updates

section, select one of the following options:

• To update the Symphony Client as soon as an update is available, select

Immediately

• To update the Symphony Client at a specific time, select

During time frame

and set the time

during which to apply the updates.

Click

Save

Backup and restore

The Backup & Restore tab in the server configuration interface is the interface for configuring

backing up and restoring configurations.

Configure backups

You can back up the Symphony Server configuration.
By default, the Symphony Server creates a backup file automatically at 11:00 PM to the local backup

path.
1.

In the server configuration interface, click

Settings

Backup & Restore

In the

Backup configuration daily at

field, type the time at which you want the Symphony

Server to create a backup file.

Senstar Symphony User Guide

Summary of Contents for Symphony 7.2 Series

































































































































Search results

Summary of Contents for Symphony 7.2 Series

Reviews:

Brands by name

Popular brands

SENSTAR Symphony 7.2 Series, User Manual

Search results

Summary of Contents for Symphony 7.2 Series

Reviews:

Brands by name

Popular brands