manualshive.com logo in svg

SENSTAR Symphony 7.2 Series, User Manual

Share
Download
SENSTAR Symphony 7.2 Series User Manual Download Page 53

Symphony Server

Health monitor information

Object

Description

healthMonitorFaultNotification

This object is the notification sent when the health monitor

detects a fault.
Trap

healthMonitorActionNotification

This object is the notification sent when the health monitor takes

an action in response to a fault.
Trap

healthMonitorName

This object is the name of the associated health monitor.

healthMonitorAction

This object is the action that the health monitor took in response

to a fault.

Configure mobile connections

You can configure Symphony to support connections with Symphony mobile applications on mobile

devices.
The mobile connections functionality in Symphony replaces the Mobile Bridge standalone

application. For more information on the Mobile Bridge standalone application, see the 

Symphony

Mobile Bridge Installation Guide

.

1.

In the server configuration interface, click 

Settings

 > 

General Settings

.

2.

Navigate to the 

Mobile Connections

 section.

3.

To select the SSL certificate, click 

Change

, select the certificate, and click 

OK

.

4.

In the 

Mobile Port

 field, set the port that Symphony uses to listen for requests from mobile

devices.

5.

In the 

Video Proxy Port

 field, set the port that Symphony uses to stream video to and receive

video from mobile devices.

6.

To allow Symphony to send push notifications to iOS devices, select 

Enable iOS Notifications

.

7.

Click 

Save

.

General settings

Video

Setting

Description

Time based video playback

restriction applied at

This setting determines how long (in minutes) after video is

recorded that a user can view the video in the Symphony Client.

Video storage

Setting

Description

Limit the number of days video

is stored

This setting determines whether Symphony deletes video older

than the set number of days.

Senstar Symphony User Guide

53

Summary of Contents for Symphony 7.2 Series

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands