manualshive.com logo in svg

SENSTAR FiberPatrol FP1150 Series, Product Manual

Share
Download
SENSTAR FiberPatrol FP1150 Series Product Manual Download Page 128

Page 128

FiberPatrol FP1150 Product Guide

System menu

System > Login - Displays the Login Dialog that is used for changing the Access Level while the 
FiberPatrol software is running. If an incorrect password is entered or the Cancel button is 
selected, the software continues to run with the same Access Level. 

System > Export Log Files - Saves the contents of the system logs into Log Files and clears the 
system logs. 

System > Export Images - Saves an image (jpg) of the current window.

System > Export All Images - Saves images (jpg) from the current window.

System > Print Window - Prints an image of the current window via the Windows default printer.

System > Exit - Shuts down the FiberPatrol software (displays login dialog for password entry).

Manage menu

The Manage menu provides access to the Clear All Alarms, Zone Masking, Zone Definition, 
Change Password and Test Alarm functions.

Manage > Clear All Alarms - Clears all current alarms without displaying the Alarm Dialog. This 
function is available on the Alarms sub-panel as the Clear All button.

Manage > Zone Masking - see 

Zone Masking (Access) on page 131

.

Manage > Zone Definition - see 

Zone Definition on page 130

.

Manage > Change Password - see 

Password maintenance on page 132

.

Manage > Test Alarm - The Test Alarm function is used to simulate an alarm. This function 
generates a simulated alarm at a random location, and is generally used for demonstration, 
personnel training and functionality verification. 

Configure menu

Configure > Save Configuration - Saves the current system settings into the configuration file. 

Configure > Load Configuration - Loads settings from the configuration files. Used for updating the 
FiberPatrol IDS after the configuration files have been externally modified or replaced. 

Configure > Alarm Auto clearing - see 

Alarm Auto Clearing on page 132

.

Configure > Remote Interface - see 

Remote Interface on page 133

.

Configure > Hardware Interfaces - Hardware Interfaces is a legacy holdover from previous 
versions of FiberPatrol, and does not apply to the current system.

Configure > Reset Controller - Resets the connection to the light signal hardware.

Configure > Factory Configuration > Revert - Resets the system configuration to the original 
system settings when used at the Supervisor access level.
Configure > Factory Configuration > Update - Updates the Factory settings to the current system 
settings when used at the Installer access level.

Note

System settings that are available to the Supervisor access level are 
automatically saved to the configuration file.

Summary of Contents for FiberPatrol FP1150 Series















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands