2.0 Safety instructions
Page 2.14
Safety instructions 551.15 \ 12.2015 \
During maintenance and service work at the system observe always
the following
"five safety rules"
.
Disconnect
Secure against restart
Check if system is volt-free
Ground and shorting
Cover nearby parts which are not volt-free
Five safety rules
WARNING
Risk of burns due to high temperatures
Some parts inside the soldering system can reach temperatures
up to 500°C during operation.
y
Wait until the soldering system is completely cooled down
before opening the hood. When hood is opened don't
grasp at the heating chamber without personal protective
equipment.
DANGER
Danger to life due to live parts
y
When switching off the system with the operating switch
On/Off only the internal control voltage 24V will be swit-
ched off. Contactor, transformator and WLAN power
socket won't be switched off by this way.
y
Before starting any maintenance or service work the sys-
tem must be switched off and secured against unintended
restart with a lock.
y
Remove the mains connector from power supply before
processing any service work at the soldering system.
Safety notes for maintenance and service
CAUTION
Heat accumulation / emission of harmful vapours by
switching off to early
y
Don't switch off the soldering system with the operating
switch or main switch and don't disconnect it from the
mains supply during the cooling phase. This will switch off
the fans, the conveyor and the exhaust box (optional).
This could cause the emission of harmful solder- or adhe-
sive vapours, a heat accumulation in the heating chamber
and thereby damages at the system.
Summary of Contents for 551.10
