SEF 551.10, Operating Manual

Page: 150 / 238

Page 9.2
9.0 Maintenance and service
Maintenance 551_15 \ 1
1.2014 \
Service and maintenance work
Only qualified, instructed and briefed staff is allowed to assemble,
disassemble and maintain the soldering system. For all work con-
cerning assembly, disassembly, initial operation, movement, main-
tenance and adjustment the "5 safety rules" and the instructions of
this manual must be observed.
Only staff specialised in electronics is allowed to work at the con-
troller. Only original spare parts and fuses with the required amper-
age must be used.
The system or additional installations must be set volt-free before
making any maintenance or service work. After the electrical
assembly all used safety devices and EMC protection measures
must be checked for function.
Generally it is not allowed to dismount any safety devices or to set
them out of operation. If the dismounting of safety devices is nec-
essary for assembly or initial operation they have mounted again
immediately after this work is finished.
For damages to property in consequence of dismounted EMC pro-
tection measures the warranty claim will expire.
Anybody who is changing or dismounting safety
devices of the curing oven, is acting grossly neg-
ligent and against the guidelines of the profes-
sional association. In case of damages to persons
or property, the manufacturer and the profession-
al association will assume no liability. The assem-
bly of any additional devices is only allowed after
written acceptance of the manufacturer.
General safety instructions