SEF 551.10, Operating Manual, Page: 89 / 238

Page 6.15
6.0 Function and start-up
Function 551.19 \ 12.2015 \
Load program
Load program
Select program
Abort
A file window will open which shows all saved soldering profiles on the
hard disk. In case that you want to load soldering profiles from a USB
mass storage or network (option):
y
Press function key <Select medium> and change to the
required drive.
y
Select the required soldering program by marking it. The
name will be shown in the top line.
y
Now activate the soldering program by pressing again
<Load program> . The display will change back to the
system screen.
y
By pressing <Back> you can quit this menu at any time.
The soldering system will be equipped with two standard soldering-
and one curing profile. You can load one of these programs and use it
as a basic for your own parameter settings.
y
Tip on the function key <Load program> in the
system screen.