SEF 551.10, Operating Manual, Page: 16 / 238

2.0 Safety instructions
Page 2.4
Safety instructions 551.15 \ 12.2015 \
Basic for the mechanical and electrical construction and design of the
following described controller, mechanics and electrics are:

EC machinery directive 2006/42/EC with its addenda and
related norms.
For the electrical part of the system is additionally valid:

EC low voltage directive 2004/108/EG

Directive of electromagnetic compatibility 2006/95/EG.
The following harmonized norms were observed for the design of the
reflow oven:
EN 12100 Safety of machinery -
General principles for design-
Risk assessment and risk reduction
EN 60204-1 Safety of machines -
Electrical equipment of machines.
Part 1: General requirements
EN 60519-1 Safety in electroheat installations
Part 1: general requirements
EN 60519-2 Safety in electroheat installations
Part 2: Particular requirements for resistance heat-
ing equipment
EN 61000-6-1: Electromagnetic compatibility (EMC) - Part 6-1: Ge-
neric standards - Immunity for residential, commer-
cial and light industrial environments (IEC 61000-6-
1:2005)
EN 61000-6-2 Electromagnetic compatibility - Generic standards
Immunity for industrial environments
EN 61000-6-3: Electromagnetic compatibility (EMC) - Part 6-3: Ge-
neric standards - Emission standard for residential,
commercial and light-industrial environments (IEC
61000-6-3:2006)
EN 61000-6-4 Electromagnetic compatibility - Part 6-4 Generic
standards - Emission standard for industrial
environments
y
Observe and follow the mentioned norms for installation,
start-up, programming and operation as well as mainte-
nance and service.
Used norms