SEF 551.10, Operating Manual, Page: 25 / 238

Page 2.13
2.0 Safety instructions
Safety instructions 551.15 \ 12.2015 \
Safety notes for daily start of operation and automatic op-
eration
y
Secure the system against unintended restart until the
failure is eliminated so that no persons or materials are in
danger.
y
Don't restart the system before the failure is eliminated
and there is no more danger for persons, system or envi-
ronment.
y
Make notes about the failure, its cause and the elimina-
tion.
During failures "

emergency-stop pressed and

internal temperature too high
the following messages appear on the touch screen:

the error message "Emergency-stop ERR",

the machine status is changing to "COOLING".

the virtual red lamp shows the status "not ready".
If the option "lamp pole" is installed the red lamp also shows the sta-
tus "not ready".
If a failure appears which can cause a risk for persons, system or
environment the complete system must be stopped by using the
emergency-stop switch. Failures
Optical signals
The users are obliged to inform the operator or owner about appearing
changes at the system which might affect the safety of persons or of
the soldering system.