SEF 551.10, Operating Manual, Page: 91 / 238

Page 6.17
6.0 Function and start-up
Function 551.19 \ 12.2015 \
There are already two soldering profiles and one curing profile saved
on the system which can be used as a basis for your own profile set
-
ting. You can load these programs and adapt them to your own re-
quirements or use them immediately for production because they are
standard profiles with averaged values.
We recommend to create your own parameter settings because the
high amount of different assemblies won't allow an optimal soldering
with averaged profiles. Profile creation can be done quick and easy
because there are only 9 parameters to set.
y
Tip on the nominal value that you want to change.
In case that the system is password secured:
y
Press on the function key <Edit program> and unlock the
system screen by entering your password.
Edit program
Create soldering
or curing profile
The value of the selected nominal value will change to an entry field
and a virtual keypad will be displayed.
y
Enter the required value with the keypad and confirm your
entry with the return sign.
If you want to abort the entry,
y
Tip on a free area in the system screen. You will abort the
entry and the previous value is kept.