SEF 551.10, Operating Manual, Page: 53 / 238

Page 4.21
4.0 Technical data
Technical Data 551_15 \ 04.2015 \

Option pin chain conveyor for ovens Series 551
Reflow ovens of the series
551 are basically equiped with a mesh belt con-
veyor.

Optional the conveyor system of the series 551 can be
equiped with a pin chain conveyor instead.
In this model the rear transfer bar can be adjusted
with the help of a hand wheel to the required working
width.
PCB / component size (only

option pin chain conveyor) :
Working width pin chain: 35-400 mm
Pin length: 4 mm
maximum assembly height: 45 mm (incl. support)
maximum reflow temperature:
approx. 280 °C
Conveyor speed: 10 - 70 cm/min
The adjustable rear transfer bar can be moved with the handwheel (1)
to the required working width. The front transfer bar is fixed and can't
be moved.
Allowed
component sizes
pin chain conveyor
Parameters pin
chain conveyor
NOTICE
y
Before adjusting the working width make sure that
there are no more PCBs in the soldering system.
For parking position move the transfer bar with the
handwheel to the very back position.