Page 9.31
9.0 Maintenance and service
Maintenance 551_15 \ 1
1.2014 \
y
Loosen and remove the 4 holding screws ISO7380 M4x10
of the flange plate with a 2,5mm socket wrench.
y
Disconnect the connection plugs and unscrew the PE
cable with a 3mm socket wrench.
y
Unscrew the flange plate together with the fan grid from
the damaged fan and mount these parts with the 4 screws
at the new fan.
y
Mount the new fan again in reversed order. Pay attention
to the correct mounting of the PE-connection.
y
Replace the soldering system again at place of production.
WARNING
Risk of burns due to high temperatures
Some parts inside the soldering system can reach temperatures
up to 500°C during operation.
y
Conduct service and maintenance work only with cooled
down oven.
WARNING
Risk of injuries due to electricity / rotating fans
y
For service and maintenance work you have to switch off
the oven according to the instructions and to disconnect
the mains plug.
Exchange fan
Dismount fan
y
To get access to the fans of the base tray, you may have
to loosen the soldering system from the cabinet (551.19).
To do this, remove the 8 assembly screws and place the
oven to at least 20 cm thick squared timbers or lift the
oven with a suitable means of transport.
WARNING
Risk of injuries due to high weight
The soldering oven 551.1X has a weight of approx.
175 kg
.
The soldering oven
551.19
without base cabinet has a weight of
about
270 kg
.
y
Lift the oven with min. 4 persons or use a forklift or crane
and place the rectangular blocks of wood under the ma-
chine feet.
Summary of Contents for 551.10
