Page 9.29
9.0 Maintenance and service
Maintenance 551_15 \ 1
1.2014 \
Exchange blower
Dismount blower
y
Disconnect the 3 connection cables with the 6,3mm con-
nectors from the blower.
y
Loosen and remove the 4 screws DIN 912 M4x12 incl.
washer with a 3mm socket wrench.
y
Lift the blower together with the mounting plate carefully
from the module. Pay attention that the inner big blower
wheel doesn't twist.
y
The spare blower will be shipped incl. mounting plate.
Place the new blower in the module.
y
Fix the blower with the 4 screws M4x12 and the belonging
washers.
y
Connect the 3 connection cables again.
y
At last check the new blower for free-wheeling.
y
After finishing the work you can close the hood again.
Therefore loosen the locking of the hood rests by opening
the hood completely again. Then close the hood slowly and
carefully.
y
Secure the hood against unallowed opening with the hexa-
gon socket screws.
CAUTION
Crushing hazard
y
When working with opened hood make sure that the hood
rest is snapped and so the hood is protected against unin-
tended lowering.
WARNING
Risk of burns due to high temperatures
Some parts inside the soldering system can reach temperatures
up to 500°C during operation.
y
Conduct service and maintenance work only with cooled
down oven..
WARNING
Risk of injuries due to electricity / rotating fans
y
For service and maintenance work you have to switch off
the oven according to the instructions and to disconnect
the mains plug.
y
Then you can open the machine hood.
Summary of Contents for 551.10
