SECURAM Systems Inc.
ScanLogic D22 Operation Guide Page 4
About Security Level Classifications
The ScanLogic D22 can operate in three different security levels as follows:
Level 1:
EntryPad can be operated by a code only.
Level 2:
EntryPad must be operated by a fingerprint and the code associated with that
enrolled fingerprint (“bound code”).
Level 3:
EntryPad can be operated by a fingerprint or a code.
Note:
All enrolled users will be deleted when security level is changed. The first code (ID No. 01) will be
set to default 123456.
Factory default security level is Level 3.
Battery Replacement Instructions
1) On the back of EntryPad, you will see one 9V alkaline battery. Take the battery out of the battery
compartment.
2) Gently remove the connector by unsnapping it from the two terminals on the top of the battery.
Never Pull on the Battery Leads.
3) Connect a new 9V alkaline battery to the battery clip.
4) Put the battery and the leads completely back into the battery compartment.
For mounting and wiring information refer to the installation instructions.