Securam FPC-0601A-D22, Operation Manual

Page: 10 / 35

SECURAM Systems Inc. ScanLogic D22 Operation Guide Page 10
Step 5: Press “ Menu/OK ”.
Step 6: Press “▲” or “▼” to select the ID No. to be enabled (e.g. ID 03).
Step 7: Press “ Menu/OK ”.
The User ID No. 03 is now enabled and can use the previously registered fingerprint and/or code to
access the lock.
9.0 Set Time Delay (Security Level 3)
Step1: Press “ Menu/OK ”. The screen will show “ Select Menu ”.
Step 2: Press “▲” or “▼” to select “ System Menu ”. Press “ Menu/OK ” again.
Step 3: Place an enrolled administrator’s finger (ID No. 01 or 02) on the scanner and hold.
Step 4: After the administrator is verified successfully, press “▲” or “▼” to select “ Set/Cancel Time
Delay ”.
Step 5: Press “ Menu/OK ”.
Step 6: Press “▲” or “▼” to set time delay (00 to 99 min). Press “ Menu/OK ”.