SECURAM Systems Inc.
ScanLogic D22 Operation Guide Page 31
The ScanLogic D22 is a digital system and can be paired with any SECURAM safe lock body.
If the lock body that you are pairing the ScanLogic D22 with has been paired previously with an
analog system, for example the SafeLogic Basic (or any other SafeLogic Series EntryPad)or was set
at the factory in the default Analog mode, the following Simple Mechanical Reset procedure must be
followed.
Step 1: Ensure that the EntryPad is not connected to the lock, and that the battery is not connected
to the EntryPad.
Step 2: Find the reset hole on the back of the lock (under the QC sticker).
Step 3: Using a poke tool, depress the reset button on the back of the lock 3 times. This discharges
any latent energy within the lock’s capacitors.
Step 4: Now the part that requires 3 hands… Depress the reset button and hold it in its depressed
position. While the reset button is depressed, connect the battery to the entrypad.
