SECURAM Systems Inc.
ScanLogic D22 Operation Guide Page 13
Step 2: The display will start counting up. The LCD screen flashes the expired time interval every 15
seconds.
Step 3: When Time Delay finishes counting, two beeps will sound and the LCD screen will show:
Step 4: The display will start counting down. The LCD screen flashes with remaining time every 15
seconds.
Within the next 5 minutes, a User must verify an enrolled fingerprint to unlock. The LCD will display
the ID of the verified user:
Note:
As a default TDO User, ID 01 can unlock without time delay.
When the EntryPad starts its Time Delay process, user can operate the EntryPad normally,
but the Lock Body will not be unlocked even if the verification is successful.
If no valid code or enrolled fingerprint are verified successfully during Time Window period,
the Lock Body will be locked until the end, and then , the LCD will show:
10.0 Set number of locks (Security Level 3)
The ScanLogic D22 is capable of managing up to 4 Lock Bodies using a junction box (Junction box
Part# CB11-1T4). The EntryPad must be programmed to recognize the additional Lock Bodies.
Step 1: Press “
Menu/OK
”. The screen will show “
Select Menu
”.
Step 2: Press “▲” or “▼” to select “
System Menu
”. Press “
Menu/OK
” again.
Step 3: Place an enrolled administrator’s finger (ID No. 01 or 02) on the scanner and hold.
