SECURAM Systems Inc.
ScanLogic D22 Operation Guide Page 33
Step 5: The system will prompt you to enter the Manufacture Code. Enter 975246.
The system will now cycle the motor drive system, locking and unlocking the lock body and checking
the Fingerprint module every 1.5 seconds. The cycle testing will continue until the battery depletes
itself of energy or power is removed.
36.2 Hardware Testing
The “Hardware Testing” menu selection is not available for field use. However, it is used in the
manufacturing process to check the board level components.
Menus
There are two menus on the ScanLogic D22, the root menu and a sub-menu.
The sub-menu is accessible by entering a valid code. The menu selections in the sub-menu
change depending upon the level of the code entered. Administrative Users (ID01 and 02) have
access to the all programming menus. User Codes have limited menu selections.
ScanLogic D22 Menu
Root Menu
Select Menu
System Menu
System Info
Show Clock Time
Recovery Code Set
Recover System
Encryption Key Set
Sub Menu – Super/Manager Codes
Select Menu
Change Code
Show Audit Trail
Wireless Connection
System Info.
Show Clock Time
DayLight Savings Time
Max. Door Open Time
