SECURAM Systems Inc.
ScanLogic D22 Operation Guide Page 11
Step 7: Now set the Time Window. Press “▲” or “▼” to select the desired Time Window interval
(01 to 15 min).
Step 8: Press “
Menu/OK
”.
The Time Delay has now been set successfully. See Section 12.0 for Time Delay opening
operation.
Note:
Time Delay Override: ID No.1 is a Time Delay Override Code and can unlock the lock at any
time, bypassing Time Delay.
Additionally, a second User ID (ID01 – ID30) can be set to as a Time Delay Override Code.
During Time Delay period, the EntryPad can be programmed but the Lock Body cannot be
unlocked.
After the original time delay has been changed successfully, the new time delay settings will
take place after the next unlocking sequence.
However, if the new Time Delay value is longer than the previous one, the new time delay
value will be effective during the next unlocking.
9.1 Set Time Delay Override User
Step 1: Press “
Menu/OK
”. The screen will show “
Select Menu
”.
Step 2: Press “▲” or “▼” to select “
System Menu
”. Press “
Menu/OK
” again.
Step 3: Enter the code of ID No. 00 (Super Code).
Step 4: When the LCD screen shows “
Select Menu
”, press “
Menu/OK
”.
Step 5: Press “▲” or “▼” to select “
Set TDO User ID
”.
Step 6: Press “
Menu/OK
”.
Step 7: Press “▲” or “▼” to select the User ID No.
