SECURAM Systems Inc.
ScanLogic D22 Operation Guide Page 22
Step 2: Press “▲” or “▼” to select “System Menu”. Press “Menu/OK” again.
Step 3: Place an enrolled administrator’s finger (ID No. 01 or 02) on the scanner and hold.
Step 4: After the fingerprint is verified successfully, press “▲” or “▼” to select “Set ID01 to Master”.
Press “Menu/OK”.
“ID01 Set to Master” can be reversed to its default setting by selecting the menu selection “Set ID01
to Manager”.
19.0 System Info. (Security Level 3)
Step 1: Press “Menu/OK”. The screen will show “Select Menu”.
Step 2: Press “▲” or “▼” to select “System INFO.”
Step 3: Press “Menu/OK” and the LCD will show information about this safe lock system as follows:
The first line of the display will show the EntryPad Part Number: 0601A-
D22
indicating this
EntryPad is a ScanLogic D22
Capacity:30 Users
- Total Number of Users
Used : 00 User
- Total Number of Users enrolled in the system
V9.91120511-27
-Firmware version
ID Dev 0017/ Host 1
-Device ID and Host ID
Audit :0200
-Audit trail records capacity
20.0 Set Security Level
Step 1: Press “Menu/OK”, the screen will show “Select Menu”.
Step 2: Press “▲” or “▼” to select “System Menu”. Press “Menu/OK” again.
Step 3: Place an enrolled administrator’s finger (ID No. 01 or 02) on the scanner and hold.
Step 4: After the fingerprint is verified successfully, press “▲” or “▼” to select the desired Security
Level
.
Level 1:
EntryPad can be operated by a code only.
Level 2:
EntryPad must be operated by a fingerprint and the code associated with that
enrolled fingerprint (“bound code”).
Level 3:
EntryPad can be operated by a fingerprint or a code.
