SECURAM Systems Inc.
ScanLogic D22 Operation Guide Page 14
Step 4: After the fingerprint is verified successfully, press “▲” or “▼” to select “
Set Number of
Locks
”. Press “Menu/OK”.
Step 5: The display will prompt you to enter the “
Mfc. Code
”. The default Mfc. Code is 975246.
Step 6: Press “▲” or “▼” to set number of locks.
Note:
The default number of locks is 01. The maximum number of locks is 04.
When opening the lock, the display will ask you to select the lock to be opened, press the numbered
button that corresponds with the lock to be opened. Then, the lock will be unlocked automatically if
verification is successful.
10.1 Authorize access to locks (Level 3)
The ScanLogic D22 allows you to set the Users that will have access to specific locks.
Step 1: Press “
Menu/OK
”. The screen will show “
Select Menu
”.
Step 2: Press “▲” or “▼” to select “
System Menu
”. Press “
Menu/OK
” again.
Step 3: Place an enrolled administrator’s finger (ID No. 01 or 02) on the scanner and hold.
Step 4: After the fingerprint is verified successfully, press “▲” or “▼” to select “
Authorize Locks
”.
Step 5: Press “
Menu/OK
”. The system will now ask which range of Users are to be programmed
to open this set of locks.