Seat Tarraco 2020 Owner'S Manual Download Page 178

Page: 178 / 424

Infotainment System

Volume and sound settings

The settings that can be selected varies de-
pending on the country and the equipment in
question, and on the vehicle's equipment.

●

Press the Infotainment button



and then

press the

Sound

function button.

●

Press the main menu function button for the

settings that have to be changed. All settings
are applied instantly.

Overview of screen and function buttons

Function button: function

Volume

: To change the volume settings.

Warnings

: To set the playback volume of warn-

ings, such as traffic announcements.

Navigation announcements

: To set the playback

volume of audio driving recommendations.

Voice control

: To set the playback volume of

voice control.

Maximum switch-on volume

: To set the equipment's

maximum switch-on volume.

Speed-dependent volume adjustment

(GALA): To set

the extent to which the volume is adjusted de-

pending on the speed. The volume of the audio
will increase automatically as the speed of the

vehicle increases.

Entertainment fading when parking

: To adjust the

desired reduction in audio volume when ParkPi-
lot is active.

Function button: function

Entertainment fading (nav. announcements)

: Adjusts

the playback volume when the navigator is
speaking.

Volume

: To set the playback volume of audio

sources connected via the AUX-IN multimedia

jack (

Low

Medium

High

). Also see

›››

page 176, Overview of screen and function

buttons

Bluetooth audio

: To set the playback volume of

the audio sources connected by Bluetooth

(

Low

Medium

High

). Also see

›››

page 176,

Overview of screen and function buttons

Equaliser

: To adjust the sound properties.

Balance - Fader

: To adjust the sound distribution. The

cursor indicates the current sound distribution in the
passenger compartment. To modify the sound distri-

bution, briefly press on the desired position in the

passenger compartment view or use the arrow keys

for a step-by-step modification. To centre sound dis-
tribution in the passenger compartment view, press
the central function button located between the ar-
rows.

Sound focus

: Optimizes the sound in the passenger

compartment.

Subwoofer

*: Adjusts the volume of the subwoofer.

Touchscreen tone

: The confirmation tone when a func-

tion button is pressed is active.

Disabling voice navigation during calls

: During a tele-

phone conversation, audio driving recommendations
will not be given.

Adjust the playback volume of external
audio sources

If you need to increase the playback volume
for the external audio source, first lower the
base volume on the infotainment system.

If the sound from the connected audio source
is

very low

, increase the

output volume

the external audio source. If this is not
enough, change the

input volume

medium

high

If the sound from the connected external au-
dio source is

too loud or distorted

, lower the

output volume

on the external audio source.

If this is not enough, change the

input vol-

ume

medium

low

176

Summary of Contents for Tarraco 2020









































































































































































































































































































































































































































Search results

Summary of Contents for Tarraco 2020

Reviews:

Related manuals for Tarraco 2020

Brands by name

Popular brands

Seat Tarraco 2020, Owner'S Manual

Search results

Summary of Contents for Tarraco 2020

Reviews:

Related manuals for Tarraco 2020

Brands by name

Popular brands