manualshive.com logo in svg

Seat Tarraco 2020, Owner'S Manual

Share
Download
Seat Tarraco 2020 Owner'S Manual Download Page 272

Driving

Operating the cruise control

Fig. 252 

On the turn signal lever: controls for

operating the GRA.

Connecting

●

Move the control 

››› 

Fig. 252

 

1

 to 



.

If no speed has been programmed, the sys-
tem will not control it.

Activating the cruise control

●

Press button 

››› 

Fig. 252

 

2

 in area 



.

The current speed is stored and the cruise
control is activated.

Temporarily interrupting

●

Move the control 

››› 

Fig. 252

 

1

 to 



 or

step on the brake.

The cruise control system is switched off tem-
porarily. The speed is stored.

Reinstating the cruise control

●

Press button 

››› 

Fig. 252

 

2

 in area 



.

Cruise control is activated at the stored
speed.

Adjusting the speed

While the GRA is set, the stored speed can be
adjusted with button 

››› 

Fig. 252

 

2

:

●

To increase in increments of 1 km/h (1 mph)

briefly press button 

››› 

Fig. 252

 

2

 in the area



.

●

To increase the speed without interruption,

keep button 

››› 

Fig. 252

 

2

 pressed down in

the area 



.

●

To reduce in increments of 1 km/h (1 mph)

briefly press button 

››› 

Fig. 252

 

2

 in the area



.

●

To reduce the speed without interruption,

keep button 

››› 

Fig. 252

 

2

 pressed down in

the area 



.

The vehicle adapts the current speed by ac-
celerating or stopping accelerating. The vehi-
cle does not brake actively.

Switching off

●

Move control 

››› 

Fig. 252

 

1

 to 



.

The system is disconnected and the memo-
rised speed is deleted.

Speed limiter

Control lamp

It lights up grey

The speed limiter is switched on without program-
ming the speed

It lights up green

The speed limiter is switched on and active.

Flashes green

The speed set by the speed limiter has been excee-

ded.

It lights up

The adaptive cruise control (ACC) or the speed limit-

er is active.

The control lamps light up when the ignition is
switched on and should turn off after approxi-
mately 2 seconds. This is the time taken for
the function check.

WARNING

Observe the safety warnings 

››› 

 in Con-

trol and warning lamps on page 81

.

270

Summary of Contents for Tarraco 2020









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands