manualshive.com logo in svg

Seat Tarraco 2020, Owner'S Manual

Share
Download
Seat Tarraco 2020 Owner'S Manual Download Page 176

Infotainment System

Additional information and display
options

The displays appearing on the screen may
vary depending on the settings, and may
differ from those described here.

The status bar on the screen can display, for
example, the current time and outside tem-
perature.

All displays can be viewed only after com-
pletely restarting the Infotainment system.

Initial configuration wizard

Fig. 168 

Initial configuration wizard

It will help you to set up your Infotainment
system the first time you switch it on.

Every time you switch on the Infotainment
system, the initial setup screen will appear

››› 

Fig. 168

 if any parameters have not been

set or if the 

NEVER

 function button has not

been pressed.

Function button: function

CLOSE

Closes the Configuration Wizard, and
the main menu or last mode in which

you used the Infotainment system will

appear.

NEVER

Disables the possibility of changing
the settings of the Infotainment sys-
tem. To configure the system go to:

System settings

 and select 

Con-

figuration wizard

.

START

Starts up the Configuration Wizard.

A

If the system includes navigation, the
date and time are set automatically

by the GPS.

B

Search and save the radio stations
with the best reception at that time in

all available bands.

C

Link your mobile phone to the Infotain-

ment system.

D

a)

Add your home address using your
current position or by manually enter-
ing an address.

PREVIOUS

 

NEXT

Previous or next parameter to config-
ure.
When a parameter has been config-

ured, the only way to reconfigure it is

by clicking on it on the main menu, not
by using the Previous/Next buttons.
When you configure a parameter, 

will be displayed over it.

Function button: function

FINISH

Once one or more settings have been
applied, finalise the configuration in

the main menu of the wizzard.

If you have not set all the parameters,
the Initial Configuration Wizard will

start the next time you turn the Info-
tainment system on.

a)

Only valid for Navi System and Navi System Plus.

Menu and system settings

The settings that can be selected varies de-
pending on the country and the equipment in
question, and on the vehicle's equipment.

●

Press the Infotainment button 

 and then

press the 

SETTINGS

 function button.

Press the function button of the main menu or
the functions for which you want to change
the settings. All settings are automatically
applied when the menus are closed.

Function button: function

Screen

: To change the screen settings.

 

Menu

: To select the main menu display mode

(

Mosaic

 or 

Carousel

).

174

Summary of Contents for Tarraco 2020









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands