Seat Tarraco 2020 Owner'S Manual Download Page 87

Page: 87 / 424

Instruments and warning/control lamps

Multifunction steering wheel*

Operation of the audio, telephone and navigation system with voice control

Fig. 69

Controls on the steering wheel.

The steering wheel includes a multifunction
module from where it is possible to control

the audio, telephone and radio/navigation
functions without needing to distract the driv-
er.

Button

Radio

Media (except AUX)

AUX

Telephone*

Navigation*

Turn

Turn volume up/down.

Turn announcement volume
up/down.

Press

Mute volume.

Mute incoming call.

Mute voice navigation.

Enable/disable voice control

This function can be used from any mode, except in the case of an active call.

Search for the previous/next
station

Short press:

Switch to the

previous/next track.

Long press:

Fast rewind/for-

ward

No function

– No active call:

Radio/Me-

dia functionality (except

AUX)

– Active call:

no function

No function for the other modes
(navigation, assistants, vehicle
status, travel data).

Change menu on instrument panel.

Summary of Contents for Tarraco 2020









































































































































































































































































































































































































































Search results

Summary of Contents for Tarraco 2020

Reviews:

Related manuals for Tarraco 2020

Brands by name

Popular brands

Seat Tarraco 2020, Owner'S Manual

Search results

Summary of Contents for Tarraco 2020

Reviews:

Related manuals for Tarraco 2020

Brands by name

Popular brands