Seat Tarraco 2020, Owner'S Manual, Page: 283 / 424

Driver assistance systems
Connecting and activating the ACC
To connect and activate the ACC, the posi-
tion of the gearbox lever, the vehicle speed
and the position of the third level of the ACC
must all be taken into account.
●
With manual transmission, the gear lever
must be in any gear except first. With auto-
matic transmission, the gear lever must be in
position
D or S . Speed must be higher than
30 km/h (18 mph) approx.
● To activate the ACC, move the third lever to
position

›››
Fig. 265
1
. At this time, the
ACC is not active and there is no program-
med speed.
●
Next, press button

›››
Fig. 266
B
or
move the lever to position

›››
Fig. 265
2
. At this moment the ACC is ac-
tivated and the current speed and distance
are programmed. The picture in the box will
change to
Active mode
›››
Fig. 263

.
While ACC is active, the vehicle travels at a
set speed and distance from the vehicle
ahead. Both speed and distance can be
changed at any time.
Setting speed
●
To set the speed, move the third lever up
+
or down
–
to the desired speed
›››
Fig. 263
6
. The speed adjustment is
made at 10 km/h (6 mph) intervals.
● If you wish to increase speed by intervals of
1 km/h (0.6 mph), move the lever to position

›››
Fig. 265
2
, or to decrease it press
button

›››
Fig. 266
B
.
The set speed can be changed when the ve-
hicle is stopped or during driving.
Setting your distance level
●
To increase or reduce the distance, press
button
A
to the right or left
›››
Fig. 266 .
The instrument panel display modifies the se-
lected distance
›››
Fig. 263
4
. There are 5
distance levels to choose from. SEAT recom-
mends level 3. The set distance can be
changed when the vehicle is stopped or while
driving
›››
.
Disconnecting and deactivating the ACC
●
To disconnect the ACC move the lever to
position

(fixed)
›››
Fig. 265
0
. An
ACC de-
activated
message appears and the func-
tion is totally deactivated.
If you do not wish to disconnect the ACC, just
to switch it temporarily to inactive mode
(Standby), move the third lever to position

3
or press the brake pedal.
It will also switch to inactive mode (Standby)
if the vehicle is stopped and the driver door is
opened.
Adjusting the default distance level at the
start of your journey
In wet road conditions, you should always set
a larger distance with regard to the vehicle in
front than when driving in dry conditions
›››
.
In the Easy Connect system, you can pre-se-
lect the distance level when connecting the
ACC to: Very short, Short, Medium, Long and
Very long using button

> SETTINGS >
Driver assistance
›››
page 82 .
Changing the driving profile
In vehicles with SEAT Drive Profile , the driving
profile selected can have an influence on the
ACC’s acceleration and braking behaviour
›››
page 263 .
In vehicles without SEAT Drive Profile , the be-
haviour of the ACC can also be affected if
any of the following drive profiles are selec-
ted in the Easy Connect system:
● Normal
●
Sport
●
Eco
●
Convenience
In this case you must access the ACC set-
tings using button

>
SETTINGS > Driver
assistance > ACC
›››
page 82 .
»
281