Seat Tarraco 2020 Owner'S Manual Download Page 135

Page: 135 / 424

Seats and headrests

Central armrests

Fig. 121

Front centre armrest

Fig. 122

Folding rear centre armrest.

Front centre armrest

lift

the central armrest, lift it upwards in the

direction of the arrow

›››

Fig. 121

, setting by

setting.

lower

the armrest, first lift it to its highest

position. Then lower it down.

move

the armrest horizontally, move it for-

ward

›››

Fig. 121

or backward as much as

possible in the direction of the corresponding
arrow.

Rear centre armrest

Depending on the features, there might be a
folding armrest in the rear centre seat.

lower

the armrest, pull the cord in the di-

rection of the arrow

›››

Fig. 122

lift

the armrest, press it down in the oppo-

site direction to the arrow

›››

Fig. 122

and lock

it in the seat backrest.

WARNING

The front centre armrest may obstruct the
driver's arm movements, which could
cause an accident and severe injuries.

●

Keep the storage compartments of the

centre armrest closed at all times while the
vehicle is in motion.

●

Never let anyone sit on the centre arm-

rest while the vehicle is in motion, not even
a child. This position is incorrect and may
cause severe injuries.

WARNING

To decrease the risk of injuries while driv-
ing, the rear centre armrest must always be
raised.

●

When the centre armrest is down, nobody

may travel in the centre rear seat, not even
a child. An incorrect sitting position may
cause severe injuries.

133

Summary of Contents for Tarraco 2020









































































































































































































































































































































































































































Search results

Summary of Contents for Tarraco 2020

Reviews:

Related manuals for Tarraco 2020

Brands by name

Popular brands

Seat Tarraco 2020, Owner'S Manual

Search results

Summary of Contents for Tarraco 2020

Reviews:

Related manuals for Tarraco 2020

Brands by name

Popular brands