Seat Tarraco 2020, Owner'S Manual

Page: 72 / 424

Operation
9999.9 km. When one of these values is
exceeded (varies depending on the ver-
sion of the instrument panel), the memo-
ry is deleted.
Delete journey data presets
●
Select the memory that you wish to erase.
●
Keep the

button on the multi-function
steering wheel pressed for approximately 2
seconds.
Select the instructions
In the Infotainment system, in the menu Vehi-
cle settings, you can display different travel
data
›››
page 82 .
Current consumption:
The current
fuel consumption display operates
throughout the journey, in litres/100 km;
and with the engine running and the ve-
hicle stopped, in litres/hour.
Average consumption:
The average
fuel consumption is displayed after driv-
ing for approximately 300 metres.
Travelling time:
This indicates the
hours (h) and minutes (min) since the ig-
nition was switched on.
Range:
Approximate distance in km that
can still be travelled if the same driving
style is maintained.
–
–
–
–
AdBlue range or  :
Approximate
distance in km that can still be travelled
with the current level of the AdBlue
® tank
with the same driving style. The indica-
tion appears from a range of less than
2,400 km and cannot be deactivated.
1)
Distance:
Distance covered in km (m)
after switching on the ignition.
Average speed:
The average speed
will be shown after driving for approxi-
mately 100 metres.
Digital speed display:
Current
speed displayed in digital format.
Convenience consumers:
Displays a
list of the connected comfort systems
that increase energy consumption, e.g.
air conditioning.
Setting a speed warning
●
Select the display
Warning at --- km/h
or
Speed warning at --- mph
.
●
Press the

button on the multi-function
steering wheel to memorise the current
speed and activate the warning.
●
Activate: set the desired speed within 5
seconds by rotating the wheel on the multi-
function steering wheel. Next, press the

button again or wait several seconds. The
speed is stored and the warning activated.
–
–
–
–
–
● Deactivate: press the

button. The stored
speed is deleted.
The warning can be adjusted for speeds be-
tween 30 km/h (18 mph) and 250 km/h
(155 mph).
Display
Oil temperature
The engine reaches its operating tempera-
ture when, under normal driving conditions,
the oil temperature is between
80°C (176°F)
and 120°C (248°F). If a great effort is required
from the engine and the outside temperature
is high, the engine oil temperature may in-
crease. This does not present any problem as
long as the warning lamps

or

›››
page 353 do not appear on the display.
Warning and information messages
(Vehicle status)
The system runs a check on certain compo-
nents and functions when the ignition is
switched on and while the vehicle is moving.
Faults displayed on the instrument panel as
red and yellow warning symbols accompa-
nied with messages and, depending on the
case, even an audible warning
›››
page 79 .
The representation of the messages and
1) Not available in all countries.
70