Seat Tarraco 2020, Owner'S Manual

Page: 247 / 424

Operating modes
Make sure there are no objects between the
pad and the mobile phone.
The mobile phone will start charging auto-
matically. For further information about
whether your mobile device uses Qi technol-
ogy, check your phone's user manual or visit
the SEAT website.
“Mobile Signal Amplifier”
The “ Mobile Signal Amplifier ” allows you to
reduce the radiation in your vehicle and enjoy
better reception.
For safety reasons, it is recommended that
you pair the system and the mobile using
Bluetooth
® and place it on the Connectivity
Box pad, for the best reception without hav-
ing to handle the mobile phone.
To establish a connection with the vehicle's
external aerial:
●
Place your mobile device in the middle of
the pad with the screen facing up
›››
Fig. 239
›››
.
Make sure there are no objects between the
pad and the mobile phone.
Your mobile phone will automatically be
ready to make use of the external aerial.
WARNING
●
The mobile phone may heat up due to the
wireless charging. Think about this before
you pick it up, and take care when removing
it.
● There must be no metallic or other ob-
jects between the mobile phone and the
housing, to prevent the functionality of the
Connectivity Box from being affected.
Note
●
Your mobile device must support the Qi
inductive charging interface standard for
proper operation.
●
The charging time and the temperature
vary in accordance with the device used.
●
The maximum charging capacity is 5 W.
●
Qi technology does not allow you to
charge more than one mobile device simul-
taneously.
●
No improvement in reception can be
guaranteed if there is more than one mo-
bile phone on the pad.
●
You are advised to keep the engine run-
ning to guarantee proper wireless charg-
ing.
●
When a telephone with Qi technology is
connected by USB, it will be charged by the
means specified by the manufacturer.
245