manualshive.com logo in svg

Seat Tarraco 2020, Owner'S Manual

Share
Download
Seat Tarraco 2020 Owner'S Manual Download Page 281

Driver assistance systems

ACC is not currently available.

While the vehicle is stationary, switch off the engine

and start it again. Perform a visual check of the radar

sensor 

››› 

Fig. 264

. If it is still unavailable, refer to a

specialised workshop to have the system inspected.

Green symbol

The ACC is active.

A vehicle in front has been detected. The ACC ad-

justs speed and distance from the vehicle in front.

Grey symbol

ACC is inactive (Standby).
A vehicle in front has been detected. The speed and

distance from the vehicle in front are not adjusted.

Green symbol

The ACC is active.
No vehicle has been detected in front.

Grey symbol

ACC is inactive (Standby).
No vehicle has been detected in front.

Some control and warning lamps will light up
briefly when the ignition is switched on to
check certain functions. They will switch off
after a few seconds.

WARNING

Observe the safety warnings 

››› 

 in Con-

trol and warning lamps on page 81

.

Status display

Fig. 263 

On the instrument panel display: 

ACC inactive (Standby). 

 ACC active.

Indications on the display 

››› 

Fig. 263

:

Vehicle ahead detected. ACC is not ac-
tive and is not regulating your speed.
Distance from the vehicle ahead. ACC is
not active and is not regulating your dis-
tance.

1

2

Vehicle ahead detected. ACC is active
and is regulating your speed.
Distance level 2 set by the driver.
ACC is active and is regulating your dis-
tance based on speed.

Note

When the ACC is connected, the indica-
tions on the instrument panel screen may
be concealed by warnings from other func-
tions, such as an incoming call.

Radar sensors

Fig. 264 

On the front bumper: radar sensors.

A radar sensor is fitted on the front bumper

››› 

Fig. 264 

1

.

The radar sensor's visibility may be impaired
by dirt, or by environmental influences such
as rain or mist. In this case the adaptive cruise

»

3

4

5

279

Summary of Contents for Tarraco 2020









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands