manualshive.com logo in svg

Seat Tarraco 2020, Owner'S Manual

Share
Download
Seat Tarraco 2020 Owner'S Manual Download Page 187

Connectivity

Requirements

In order to use Apple CarPlay™, the following
requirements must be met:

●

Make sure that you do not have Apple

CarPlay™ restricted on your device, at: 

Set-

tings > General > Restrictions >
CarPlay > ON

.

●

The mobile device must be compatible with

Apple CarPlay™.

Initiating the connection

In order to initiate the connection with the de-
vice, just connect it to the Infotainment sys-
tem via the USB cable.

●

A pop-up screen will appear, which will re-

quest that you accept the device.

●

If you start the session using Apple

CarPlay™ technology, it will not be possible
to pair another device via Bluetooth

®

. The fol-

lowing message will appear in the main

Phone

 menu:

Please disconnect Apple CarPlay
first to connect a different mo-
bile phone.

Holding down the 

 button will start the

Apple™ voice “engine”.

To return to the basic contents of the Infotain-
ment system, press the 

SEAT

 icon.

Android Auto™*

3

 Valid for compatible Android mobile phones.

Android Auto™ is a protocol which enables
communication between a device and the in-
fotainment system.

This makes it possible to display and operate
content and functions on the device from the
screen of the infotainment system.

Requirements

In order to use Android Auto™, the following
requirements must be met:

●

The mobile device must be compatible with

Android Auto™.

●

The Android Auto™ application should al-

ready be downloaded and installed on the
mobile device.

Initiating the connection

In order to initiate the connection with the de-
vice, just use the USB cable to connect it to
the infotainment system and follow the in-
structions on the device to be paired.

●

The first connection to Android Auto™ must

be done while the vehicle is stationary.

●

Once the first pop-up window about ac-

cepting data transfer between the car and
the device has been accepted, a message
will appear requesting that you check your

mobile device for the confirmations needed
to pair it with the Infotainment system.

●

If you are starting the session using Android

Auto™ technology, the device also automati-
cally connects to the Infotainment system via
Bluetooth

®

 and it will not be possible to pair

another device via Bluetooth

®

.

Holding down the 

 button will start the

Android™ voice “engine”.

To return to the basic contents of the Infotain-
ment system, press the 

 button.

Note

Some devices require a change in the USB
connection mode in order to use Android
Auto™.

●

Make sure that your device is in “Media

Transfer Protocol (MTP)” mode before it is
connected to the Infotainment system.

Note

Android Auto™ requires the use of Google™
services, as well as certain basic applica-
tions of the Android system.

●

Make sure that you always have Google™

services updated in order to use this tech-
nology.

185

Summary of Contents for Tarraco 2020









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands