manualshive.com logo in svg

Seat Tarraco 2020, Owner'S Manual

Share
Download
Seat Tarraco 2020 Owner'S Manual Download Page 184

Infotainment System

Activation of Full Link

Fig. 173 

Full Link Setup

Fig. 174 

Full Link menu

Data connection via Wi-Fi or SIM is not
necessary to establish the connection be-
tween the smartphone and Full Link.

Data connection via Wi-Fi or SIM is neces-
sary to enable all of the app features

1)

.

Proceed as follows to use Full Link:

●

Switch on the Infotainment system

●

Connect the smartphone to the vehicle's

USB port using a USB cable 

››› 

page 244

.

●

In the main menu for the Full Link settings,

select 

Activate data transfer for

SEAT apps

 

››› 

Fig. 173

.

Finally, a message will appear stating that
data transfer will commence when the device
is connected. Please note that data is trans-
ferred over connections between your vehi-
cle and mobile device. Press 

OK

. Once selec-

ted, the technology compatible with your de-
vice can be used.

Note

Depending on your smartphone, it may
have to be unlocked for the connection to
occur.

What should I do if it does not con-
nect?

Restart the mobile device.

Check the USB cable.

 Check whether the

USB cable is damaged. Check that neither
connection (USB/micro USB) is damaged or
worn.

Check that the USB ports are correctly
connected.

 Check that the USB port of the

vehicle and the device are not damaged
and/or deteriorated.

●

Clean the USB ports (device and vehicle).

●

Try with another compatible mobile device.

●

Have the USB port replaced at a SEAT au-

thorised service.

●

Have the mobile device repaired or replace

it.

1)

Using the data connection to transfer the

smartphone apps to Full Link may involve addi-
tional charges. Please check the charges with
your operator.

182

Summary of Contents for Tarraco 2020









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands