Seat Tarraco 2020, Owner'S Manual

Page: 318 / 424

Driving
Parking Aid operation
Fig. 288
Centre console: parking aid button.
Manually connecting and disconnecting
the parking aid
●
Press the

button once .
Manual disconnection of Parking Aid dis-
play (the audible sounds remain active)
●
Press a button on the main menu of the fac-
tory-assembled infotainment system.
●
OR press the
BACK

function button.
Automatic connection of Parking Aid
●
Select reverse gear.
●
OR : If you drive forward at a speed of less
than 15 km/h (9 mph) and you encounter an
obstacle, it is detected when it is approx. less
than 95 cm. away. If the automatic connec-
tion is activated, a reduced display is shown
›››
Fig. 289 .
● OR : if the vehicle moves backwards.
Automatic disconnection of Parking Aid
●
Move the selector lever to position P .
●
OR : drive forwards at 15 km/h (9 mph) or
faster.
Temporary suppression of sound in Park-
ing Aid
●
Press the

function button.
Change from reduced view to full view
●
Select reverse gear.
●
OR : press the car icon on the reduced view.
Switch to the reverse assist image (Rear
View Camera “RVC”)
●
Select reverse gear.
●
OR press the
RVC
function button.
A short confirmation signal will be heard and
the button symbol will light up when the sys-
tem is switched on.
Automatic activation
Fig. 289
Miniature indication of automatic ac-
tivation.
When the parking aid plus connects auto-
matically, a diagram of the vehicle and the
segments will appear on the left of the dis-
play
›››
Fig. 289 .
It only operates every time the speed is re-
duced below 15 km/h (9 mph) for the first
time.
If it is switched off using the

button, one of
the following actions must be taken for it to
reactivate automatically:
●
Switch off the ignition and switch it on
again.
●
OR : drive forward at over 15 km/h (9 mph)
approx.
●
OR : move the lever into position P and pack
again.
316