Section 12
PROPULSION SYSTEM
Subsection 02
(JET PUMP)
SMR2002-088_12_02A.FM
12-02-37
Nozzle
Insert bushing
no. 42
in nozzle
no. 20
.
Insert bushing
no. 43
in nozzle
no. 20
with its off-
set pointing rearward.
1. Bushing offset
Position their flanges from inside of nozzle.
Insert sleeves
no. 22
in bushings
no. 42
and
no. 43
.
Install nozzle on venturi
no. 24
; position its steer-
ing arm on RH side. Apply Loctite 243 (blue) on
screw threads (or use new self-locking screws).
Install screws
no. 21
and washer
no. 23
then
torque to 24 N•m (18 lbf•ft).
OPAS
Reconnect OPAS hose. Torque clamp screw to 1.7
N•m (15 lbf•
in
).
Fasten OPAS “U” lever to nozzle. Apply Loctite 243
(blue) on screw threads (or use new self-locking
screws). Torque screw to 20 N•m (15 lbf•ft).
Pivot Triangle
Install head bolts toward inside.
NOTE:
Make sure the pivot triangle turn freely.
Reverse Gate
Install reverse gate with spacer and washer. Torque
to 20 N•m (15 lbf•ft).
NOTE:
When installing the reverse gate, pay at-
tention to position its lever behind the reverse
gate support stopper.
1. Stopper
Steering Cable
Refer to section, STEERING SYSTEM.
Reverse Cable
Refer to REVERSE SYSTEM.
WARNING
Screws must be torqued as specified.
1
F18J0GA
F07J07A
1
www.SeaDooManuals.net
Summary of Contents for GTX 4-TEC 5573 2002
