Section 05
ENGINE (4-TEC)
Subsection 07
(LUBRICATION SYSTEM)
05-07-6
SMR2002_071_05_07A.FM
OIL FILTER
Removal
Remove:
– engine oil (refer to OIL CHANGE)
– oil filter screw
no. 1
– oil filter cover
no. 2
– oil filter
no. 3
.
1. Oil filter screw
2. Oil filter cover
3. Oil filter
Place rags in fillet area to prevent spillage. If spillage
occurs, clean immediately with the pulley flange
cleaner (P/N 413 711 809) to prevent stains.
Inspection
Check oil filter cover O-ring
no. 4
and oil filter screw
O-ring, change if necessary.
Check and clean the oil filter inlet and outlet area
for dirt and other contaminations.
1. Inlet bore from the oil pump to the oil filter
2. Outlet bore to the engine oil providing system
Installation
The installation is the opposite of the removal pro-
cedure. Pay attention to the following details.
Install a new oil filter.
Install O-ring on oil filter cover.
Torque oil filter screw to 9 N•m (80 lbf•
in
).
WARNING
Wear safety glasses and work in a well venti-
lated area when working with strong chemical
products. Also wear suitable non-absorbent
gloves to protect your hands.
1
R1503motr114A
2
3
1
R1503motr115A
2
R1503motr116A
www.SeaDooManuals.net
Summary of Contents for GTX 4-TEC 5573 2002
