Section 05
ENGINE (4-TEC)
Subsection 07
(LUBRICATION SYSTEM)
05-07-18
SMR2002_071_05_07A.FM
Inspection
If O-rings and rubber rings are brittle, cracked or
hard, replace them.
Clean all contact surfaces of oil separator.
Check and clean the oil and blow-by channels for
dirt and other contaminations.
Installation
For installation, reverse the removal procedure.
Pay attention to the following details.
1. Screws M6 x 25
2. Screws M6 x 85
Apply grease on O-rings and rubber rings.
Torque screws to 10 N•m (88 lbf•
in
). Apply Loctite
243 (blue) on threads.
1
R1503motr119A
2
www.SeaDooManuals.net
Summary of Contents for GTX 4-TEC 5573 2002
