Section 14
HULL/BODY
Subsection 02
(ADJUSTMENT AND REPAIR)
14-02-10
SMR2002-092_14_02A.FM
MIRROR
GTX 4-TEC and GTX DI
Removal and Installation
To remove mirror proceed as follows:
– Remove storage compartment inner shell from
storage cover as described earlier in this section.
– Remove two hexagonal screws and flat washers.
– Remove defective mirror with a knive blade.
1. Mirror
2. Knive blade
– Place the mirror frame in hot water to “soften”
the material to allow mirror installation in its frame.
– Reinstall storage compartment inner shell.
INFO CENTER (LCD GAUGES)
GTX DI
Info gauges can be pulled directly out from the
storage cover.
GTX 4-TEC
Removal and Installation
To remove the Info center (Speedometer and LCD
Info gauge) proceed as follows:
– Remove storage compartment inner shell from
storage as described earlier in this section to
get access.
– Push Info Center (LCD Gauges) from the stor-
age cover. If the Info center does not come out
easily use liquid soap.
– Refer to ELECTRICAL section to unplug gauges
from harnesses.
– Reinstall new Info center.
– Reinstall storage compartment inner shell.
DEFLECTOR AND/OR UPPER
GRILL
Removal and Installation
To remove the deflector and/or the upper grill pro-
ceed as follows:
– Remove storage from storage cover compart-
ment inner shell as described earlier in this sec-
tion to get access.
– Remove the defective deflector and/or the up-
per grill from plastic retaining clip. Use two
screwdrivers to release the deflector or the grill.
1. Inner skin
2. Deflector retaining clips
RELEASE DEFLECTOR
1
F18L21A
2
1
2
F18L22A
2
F18L23A
www.SeaDooManuals.net
Summary of Contents for GTX 4-TEC 5573 2002
