Section 05
ENGINE (4-TEC)
Subsection 08
(CYLINDER HEAD AND VALVES)
SMR2002_072_05_08A.FM
05-08-15
1. Thrust washer
2. Valve spring guide
3. Valve stem seal
Apply engine oil on valve stem and install it.
CAUTION:
Be careful when valve stem is passed
through sealing lips of valve stem seal.
1. Sealing lips of valve stem seal
To ease installation of cotters, apply oil or grease
to them so that they remain in place while releas-
ing the spring.
After spring is installed, ensure it is properly locked
by tapping on valve stem end with a soft hammer
so that valve opens and closes a few times.
CAUTION:
An improperly locked valve spring will
cause engine damage.
2
R1503motr108A
3
1
R1503motr108B
1
www.SeaDooManuals.net
Summary of Contents for GTX 4-TEC 5573 2002
