SDMO R33C3, User And Maintenance Manual

Page: 13 / 244

1.4.3 Safety precautions in case of electrical shock
In the event of an electric shock, observe the following instructions:
1. Avoid direct contact both with the live conductor and the victim's body.
2. Shut off the power immediately and activate the emergency stop for the
equipment concerned.
Note: the live wire may be cut with an axe. Take extreme
care to avoid the electric arc that will be generated by this.
3. If it is impossible to access the equipment: move the victim away from the live
conductor using a dry piece of wood, dry clothing or other non-conducting
material.
4. Move the victim away from any situations where there is a danger of death.
5. Contact the emergency services.
6. If breathing has stopped, begin artificial respiration at once.
7. In the event of cardiac arrest, carry out cardiac massage.
1.4.4 Safety precautions relating to fire, burns and explosions
DANGER
FUELS / FLAMMABLE PRODUCTS / PRESSURISED FLUID
- RISK OF BURNS -
- RISK OF FIRE -
- RISK OF EXPLOSION -
1. Before starting the equipment, move any flammable or explosive products away (petrol, oil, cloth, etc.).
2. It is prohibited to put combustible materials on the hot parts of the equipment (for example: exhaust pipe).
3. Avoid any contact with the hot parts of the equipment (for example: exhaust pipe).
4. Use appropriate ventilation to allow the equipment to cool correctly.
5. Wait for the engine to stop and cool down completely before removing the radiator cap.
6. Wait for the equipment to stop and cool down completely before covering the equipment (if necessary).
7. Depressurise the air, oil and cooling circuits before removing or disconnecting all the fittings, pipes or connected components.
8. Ensure that the equipment in operation is fixed (in a stationary position).
When installing the equipment on a vehicle or other mobile equipment, a study must be conducted
beforehand in order to take into account the various specific uses of the generating set.
IMPORTANT
11/242