User Manual SM6026
91
For example: WrtCmd (“COMP:SWAP ON”)
Query syntax: COMParator:SWAP?
Return format: <NR1><NL^END>
The COMParator:BIN:CLEar command is used to clear all limits on limit table setup page.
Command syntax: COMParator:BIN:CLEar
For example: WrtCmd (“COMP:BIN:CLE”)
The COMParator:BIN:COUNt[:STATe] command is used to set the bin count function as ON or OFF. The
COMParator:BIN:COUNt[:STATe]? query returns the current state of the bin count function.
Command syntax:
ON
COMParator:BIN:COUNt[:STATe]
OFF
1
0
Where,
1 (decimal 49) is equal to ON.
0 (decimal 48) is equal to OFF.
For example: WrtCmd (“COMP:BIN:COUN ON”)
Query syntax: COMParator:BIN:COUNt[STATe]?
Return format: <NR1><NL^END>
The COMParator:BIN:COUNt:DATA? query returns the current comparison result of the bin count.
Query syntax: COMParator:BIN:COUNt:DATA?
Return format: <BIN1 count>, <BIN2 count>, …, <BIN9 count>, <OUT OF BIN count>, <AUX BIN
count><NL^END>
Where,
<BIN1-9 count> is the count result of BIN1-9, in NR1 data format.
<OUT OF BIN count> is the count result of the OUT OF BIN, in NR1 data format.
<AUX BIN count> is the count result of the auxiliary bin, in NR1 data format.
The COMParator:BIN:COUNt:CLEar command is used to clear all bin count results.
Command syntax: COMParator:BIN:COUNt:CLEar
For example: WrtCmd (“COMP:BIN:COUN:CLE”)
7.1.16 Mass MEMory subsystem commands
The Mass MEMory subsystem commands are used for file storing and load.
Command tree:
The MMEMory:LOAD:STATe command is used to load the existed file.
Command syntax: MMEMory:LOAD:STATe<value>
Where,
<value> is the file number ranging from 0 to 39 (NR1).
For example: WrtCmd (“MMEM:LOAD:STAT 1”)
Mass MEMory
:LOAD
:STATe <record number>
:STORe
:STATe <record number>,“<string>”
