User Manual SM6026
44
4.1.9
BAUD RATE
Baud rate is used select the baud rate of the RS232C interface. The available baud rate of this
instrument is from 9.600k to 115.200k.
Operation steps for setting the baud rate
:
1) Move the cursor to BAUD RATE, the following soft keys will be displayed.
↑
(
+
)
This soft key is used to increase the baud rate.
↓
(
-
)
This soft key is used to decrease the baud rate.
4.1.10 DATA/TIME
When moving to the time zone, users can modify the system time.
4.2 LCR <FILE MANAGE>
SM6026 series instrument can save the user-set parameter to the nonvolatile memory in the form of file,
so when use the same setting next time user can load a corresponding file to obtain the parameter set
and used last time. By doing so, it can save the time of setting parameter and improve the production
efficiency. Press
[FILE MANAGE]
to enter into the file manage page, shown as below:
4.2.1
Setup file for single-group component (*.STA)
40 groups of different single groups of component set file (*.STA file) can be saved in the instrument, but
external storage U-disk can display/operate 500 groups of different single groups of component set file
(note: U-disc is an optional accessory).
Use
FILE MANAGE
function on the following File menus, the following data will be saved or loaded in the
form of file, which are called *.STA file.
Control and setting parameter on <MEASURE SETUP> page
FUNCA
FREQ
LEVEL
RANGE
SPEED