User Manual SM6026
82
Data
Sort result
0
+1
+2
+3
+4
+5
+6
+7
+8
+9
+10
Out of tolerance
Bin 1
Bin 2
Bin 3
Bin 4
Bin 5
Bin 6
Bin 7
Bin 8
Bin 9
Auxiliary bin
<Bin No.> format: The data displays the sorting results of the displayed bin, shown as above.
Only when the instrument compare function is set as ON, <bin No.> data can be displayed.
The output format of <bin No.> data applies 2 to 3 digits ASCII: SN or SNN (S: +/_, N: from 0 to 9).
On list sweep display page, the ASCII data output format is shown as below, that is, the
return-circuit replaces sweep point number.
，
SN.NNNNNESNN
，
SN.NNNNNESNN
，
SN
，
SN NL^END
<DATA A>
<DATA B>
<Status>
<Judge>
Figure 6 ASCII format 2 (list sweep)
Where,
Descriptions for <DATA A>, <DATA B>, <Status> are the same described before.
<Judge> format is as below:
<Input/Output> format: The data displays the compare result of the list sweep..
Data
Result
-1
0
+1
low
pass
high
When the compare function of the list sweep measurement is turned off, the output result of
<Input/Output> is 0.
<Input/Output> data output format applies 2-digits ASCII format: SN (S: +/_, N: from 0 to 1)
