Schwing SPB 28, Operation Manual

Page: 47 / 216

GENERAL RULE S
700+smgr.fm
PAGE 17
S AF ETY M AN U AL
6.14
Possible boom damage and tipping hazard! Never exceed the
manufacturer’s rated weight limit for the placing boom! If continuation pipes are
connected to the end hose, they must
NOT impose any additional load on the
boom (Figure 20).
6.15 The length of the boom end hose is not as critical as the weight
of the hose when filled with concrete. Review the weight restriction label on the
boom of CPMA-compliant units or check with the manufacturer. Never exceed
the recommended weight or structural damage could occur.
6.16
Possible structural damage. If you remove the supplied tip hose
and replace it with a combination of reducers and hoses, the total weight of all
hanging pieces (including the weight of the concrete) must not exceed the weight
of the supplied tip hose (including concrete). As an example, a 12-foot long,
WARNING
1hose1.eps
Never e x ceed the
manufacturerʼs weight
limit for the boom
mt1hose.eps
Extra pipe or hose must
NOT
impose an additional
load on the boom
Figure 20
Know, and do not exceed, the maximum weight
allowed to hang from the boom
WARNING
WARNING