Schwing SPB 28, Operation Manual

Page: 174 / 216

82
Operation
SPB Operation Manual
Controllers
Cable Remote Control
1. Emergency shut-off button: stops the drive motor
of the hydraulic unit
2. Not used (Figure 34)
3. Momentary contact switch: climbing UP - 0 - DOWN
3
2
1
Figure 45
Cable remote control
Control Cabinet
Receptacle for remote control climbing cable including
a dummy plug which must be used to enable the e-stop
system.
Main power switch
Dummy plug
Self-Climber
Remote Socket
SPB Remote Socket
Figure 46
Remote receptacle and cable
Emergency Operation Control
*Control lever: Climbing equipment UP -0-DOWN
Emergency Control Valve
Figure 47
Emergency control valve
Climbing
The placing boom ready for operation is anchored via
the boom tower and the base cross on the foundation /
base slab.
During the climbing operations, the boom tower must
be guided by three climbing floor frames and supported
by two. These frames transfer the occurring forces into
the structure and maintain stability (Figure 37).
The climbing equipment should be installed on the low-
er most climbing floor frame. An exception can be made
upon approval of the jobsite engineer that a higher floor
has cured sufficiently to support the weight.
A minimum distance between floor frames is re -
quired. Due to the variety of models available,
please contact the factory for corresponding
technical data (have the serial number of the unit
ready).