Schwing SPB 28, Operation Manual

Page: 123 / 216

31
Overview
SPB Operation Manual
First Commissioning
Installation of your new unit
When your new Schwing separate placing boom was
delivered, it was accompanied by several documents
in addition to this operation manual. One of those im-
portant documents is called the “DELIVERY INSPEC-
TION REPORT”.
Each item listed should be checked before your new
placing boom is sent to the first job.
SAIQC-480
REV. 01-18-07
Delivery Date:
5900 Centerville Road Report Date:
White Bear, Minnesota 55127
Owner Name: Pump Model:
Address: Year Manufactured:
Serial Number:
1
2
3
4
5
6
7
8
9
10
11
12
* Please note any other comments on the back of white copy.
Signature: Owner / Distributor / Operator (circle which applies)
Safety decals (refer to decal sheet)
Tools / spare parts (refer to tool sheet)
Visual inspection of paint job
Holding valve on boom
All boom pin retainers in place and secured
End (boom) hose cable hook installed
Operational
Comments*
(If repaired required)
Required
Repair
Hydraulic tank oil level
Boom greased
Remote control functions
Manual check of all hand valves
Pressure relief setting of boom system
DELIVERY INSPECTION REPORT
IMPORTANT, PLEASE READ
All FUTURE WARRANTY CLAIMS WILL BE BASED UPON THE RETURN OF THIS REPORT!
SERVICE DEPARTMENT (at the above address) within 15 days of the above mentioned delivery date.
This DELIVERY INSPECTION REPORT must be completed and the white copy returned to SCHWING America's
Hydraulic hoses and fittings checked for leakage
(heat oil between 70° - 80° C)