Maintenance | 92
Be sure to disconnect the power cord from the wall outlet at least once a year and
check for the following:
The power cord's inner wires are exposed, broken, etc.
The power cord's coating has a crack or dent.
When bending the power cord, the power turns off and on.
Part of the power cord becomes hot.
The power cord is damaged.
If any of the above conditions exist, do not use the power cord and consult
Sawgrass. Use of the power cord could result in fire or electric shock.
Be sure to disconnect the plug from the wall outlet and clean the prongs and the
area around the prongs at least once a year. Allowing dust to build up on the plug
constitutes a fire hazard.
Moving
The precautions when moving the printer a short distance or long distance are explained.
Moving a Short Distance
Take the following precautions when moving the printer a short distance - for instance,
when attaching an optional paper tray or relocating the printer inside the same room.
SG800NA and SG800EU weigh around 15 kg (33 lb.).
Grip the center area at the base of the printer's sides. Lift it slowly and do not
strain your body.
When moving the printer, remove the option. Careless handling and over exertion
when lifting can result in breakage and/or injury.
Unplug the power cord from the wall outlet before you move the printer. While
moving the printer, take care that the power cord is not damaged under the
printer. Failing to take these precautions could result in fire or electric shock.
